Water intrusion, contamination, or flooding? We don't just dry the surface — we eliminate the source, decontaminate, and protect your property from mold. IICRC certified technicians. Direct insurance billing. 60-minute guaranteed response.
Water remediation goes further than extraction. It means identifying the contamination source, eliminating hazardous water, disinfecting affected areas, drying all structural materials, and preventing mold before it takes hold. Our IICRC-certified team handles every phase in-house — from your first call to the final clearance inspection. One team, one invoice, one insurance claim.
Whether it's a clean-water pipe burst or a Category 3 sewage backup, our certified remediation team has the training and equipment to handle it safely and completely.
Industrial-grade submersible pumps and wet-vacs remove standing water within minutes of arrival. Fast extraction limits structural damage, prevents water from migrating further, and begins the drying process immediately.
Commercial air movers, low-grain refrigerant dehumidifiers, and desiccant systems dry walls, floors, and cavities at the structural level. Moisture readings are logged daily to document progress for your insurance claim.
Category 2 and 3 water events require EPA-approved antimicrobial agents applied to all surfaces. We disinfect floors, walls, and cavities to eliminate bacteria, pathogens, and biological contaminants safely.
Thermal imaging cameras and calibrated moisture meters locate hidden water inside walls, under floors, and in ceilings — areas invisible to the naked eye. We map every wet zone and test daily until all readings return to normal.
Applied immediately after extraction, our antimicrobial barrier treatment prevents mold spores from colonizing wet structural materials during the drying phase. This is a critical step that many companies skip — we never do.
Every remediation job includes complete photographic documentation, moisture logs, and written scope of work submitted directly to your insurance adjuster. We handle the paperwork — you focus on getting your life back.
The IICRC classifies water damage into three categories based on contamination level. Each requires a different remediation protocol — and our certified technicians know exactly how to handle all three.
Water from sanitary sources — broken supply lines, overflowing sinks, rain intrusion. While initially clean, Category 1 water degrades quickly if left standing. Rapid extraction and structural drying prevent escalation to a higher category.
Contaminated water from dishwashers, washing machines, overflowing toilets (urine only), or sump pump failures. Grey water contains microorganisms and must be treated with EPA-approved disinfectants in addition to extraction and drying.
Highly contaminated water from sewage backups, river flooding, or any source carrying pathogens. All porous materials must be fully removed — no exceptions. Our team follows IICRC S500 protocols for safe containment and disposal.
Frisco's winter freezes cause pipes to burst without warning, releasing thousands of gallons within minutes. We respond 24/7 to extract water, prevent structural damage, and dry hidden cavities before mold develops.
Floodwater is always treated as Category 3 regardless of appearance. We handle full containment, safe removal of contaminated materials, structural drying, and antimicrobial treatment after any flooding event in Frisco or DFW.
Standing water in crawl spaces and below-grade areas creates the ideal environment for mold, rot, and structural deterioration. We pump, dry, decontaminate, and encapsulate these areas to prevent ongoing moisture problems.
A proven 6-step remediation process — designed to remove every trace of moisture and contamination from your Frisco property.
Call +1(945)297-3238 any time. A certified dispatcher answers immediately and our crew arrives on-site within 60 minutes — guaranteed.
Thermal imaging and professional moisture meters identify all affected areas including hidden water inside walls, under floors, and inside ceiling cavities.
Industrial pumps and wet-vacs remove all standing water immediately. Contaminated water is safely contained and disposed of per EPA guidelines.
Category 2 and 3 events receive immediate EPA-approved antimicrobial treatment on all affected surfaces. Contaminated porous materials are removed safely.
Commercial drying systems run until all structural materials reach target moisture levels. Progress is logged daily and reported to your insurance adjuster.
Final moisture verification confirms complete drying. We provide a written clearance report and transition seamlessly to the repair and rebuild phase if needed.
Water damage becomes exponentially more expensive the longer it sits. These signs mean professional remediation is urgent — not optional.
Any standing water inside your home or business needs to be extracted by professionals immediately. Even shallow water can saturate subfloors and walls within hours.
Yellow, brown, or dark stains indicate moisture is present or has been — either from a current leak or a historic water event. Both require professional assessment.
A persistent musty odor is almost always mold — which means water has been present long enough for spores to begin colonizing. Professional remediation is needed immediately.
Paint peeling from walls or ceilings, or drywall that feels soft and spongy, indicates active moisture behind the surface — a precursor to mold growth.
Any visible mold means the water event was not properly remediated. All mold-affected materials must be removed and the source of moisture identified and eliminated.
A sewage odor or visible backup is a Category 3 emergency. Do not attempt cleanup without professional protective equipment and proper decontamination procedures.
IICRC certification, 60-minute response, and end-to-end remediation — from emergency extraction to mold clearance and full rebuild. We outperform every competitor in Frisco and DFW.
We handle every phase in-house: extraction, drying, decontamination, mold prevention, and full property repair. No handoffs, no delays, one invoice.
Our technicians hold dual IICRC certification in water damage restoration (S500) and mold remediation (S520) — the highest industry standard on every job.
We photograph, document, and submit the complete remediation scope to your adjuster. We work with all major Texas providers and bill directly — you pay only your deductible.
No charge for the inspection, moisture mapping, or written estimate. Transparent pricing with no hidden fees — ever.
We honor our 60-minute on-site guarantee for every emergency in Frisco and DFW, 24 hours a day, 7 days a week, including every holiday.
Complete remediation guarantee. We don't close a job until moisture readings confirm full structural drying and your property is safe to occupy — every time.
Water remediation caused by a sudden and accidental event is typically covered by homeowners insurance. We manage the entire process so you don't have to deal with paperwork during an already stressful time.
Out-of-pocket when you use your homeowner's insurance — we bill directly and maximize your remediation claim coverage.
Real homeowners across Frisco, Plano, McKinney and DFW trust Water Damage Frisco when it matters most.
"After our dishwasher flooded the kitchen overnight, I called at 6 AM and a crew was at my door by 7. They tested for contamination, extracted everything, set up drying equipment, and handled the insurance claim completely. Absolutely professional."
Google Review"We had a sewage backup in the basement — an absolute nightmare. Water Damage Frisco arrived quickly, contained the area, removed all contaminated material safely, and disinfected everything. I felt safe in my home again within days. Worth every penny."
Google Review"Storm flooding hit our first floor hard. These guys showed up fast, had all the drying equipment running the same day, and used moisture meters I had never seen before to find water inside walls I didn't know was there. Saved us from a major mold problem."
Google ReviewAuthoritative guidance from U.S. government agencies on safe water damage cleanup, contamination risks, and remediation standards for homeowners and contractors.
The U.S. Environmental Protection Agency provides comprehensive guidance on mold and moisture control in residential buildings — covering what causes mold after water events, health risks of exposure, when professional remediation is required, and how to choose a qualified contractor. Essential reading for any homeowner dealing with water damage in Frisco or DFW.
Visit EPA Mold & Moisture Guide →The U.S. Centers for Disease Control and Prevention outlines the health risks of mold and contaminated water following flooding events, including which populations are most vulnerable, what personal protective equipment is required during cleanup, and when professional remediation services are necessary to ensure a safe indoor environment.
Visit CDC Flood Mold Safety Guide →Same 60-minute response, same IICRC-certified quality — across every city in the Dallas-Fort Worth metroplex.
Complete water, fire, and mold restoration across Frisco and all of DFW.
For emergencies, always call us directly for a 60-minute guaranteed response. For estimates and non-emergency inquiries, fill out the form and we'll respond fast.
Fill out below — we respond fast.
🔒 Your info goes directly to info@waterdamagefrisco.org. Never shared.
IICRC-certified · 60-minute guaranteed response · Complete remediation · Direct insurance billing · Free on-site estimate
Fast, certified, and reliable Water, Fire, Mold, Storm & Commercial Restoration Services across Frisco, Little Elm & North Texas.
2026 © Copyright Water Damage Frisco®. All Right Reserved. Powered by Water Damage Frisco.
